Hydraulic Breaker: five precautions for splint operation

The Hydraulic Breaker adopts the same large diameter as the piston and the drill rod, so that the match

 effect between the breaker and the main engine is better, and the higher output energy is rationally

 used to save energy and achieve high work efficiency. The following is an introduction to the 

precautions for the breaker splint operation matter.

 1. When the hose vibrates violently, the operation should be stopped. If there is severe vibration of

 the

 breaker splint hose, it may be a fault, and it should be checked in time to avoid damage to the 

hammer

 body parts.

 2. Avoid air strikes. When the object is broken, air strikes should be avoided. If the air strikes 

continue,

 the breaker hammer splint bolts will be loosened or broken, and even the excavator/loader will be 

adversely affected.

 3. When the stroke of the oil cylinder on the boom of the excavator and loader is the largest (the oil 

cylinder is fully extended or retracted), do not perform striking operations, otherwise the oil cylinder

 of the excavator or loader will be damaged.

 4. The continuous blow should not exceed one minute. Prolonged blowing operation will cause the 

oil temperature to rise, which will lead to excessive wear of steel fibers and aging of oil seals.

 The wonderful content is endless, the editor will provide you with more knowledge in the future, 

please continue to pay attention to us, Yantai breaker manufacturers will provide you with excellent

 services throughout the process, we will be your ideal choice, if you need it, hurry up Get in touch

 with us and look forward to your visit.