Smartisan Hammer Mobile M1L Mirror Stainless Steel Unpacking

Before developing the meeting, I had plans to support Luo Luo's hammer anyway this year. After all, after using T2, I became hammered.

In the middle of the conference, my idea of ​​buying M1 was even more exuberant.

So at the eleventh hour after the conference was opened, I immediately ordered a mirrored stainless steel version. After half an hour, the delivery was shown. After three days of delivery, one day later, I received this phone.

Well, it's easy to get out of the box.

If you order directly from Hammer's official website, in addition to the fixed packaging, there is a red express box. This box is made of ordinary kraft paper. There is no special place.

The only thing worth mentioning is writing a line of words "Open your joy" at the bottom of the opening.

Open the box is a hammer black matte box. This box believes that many people are already tired of reading, but it is still necessary to say that the feel of the box is quite good. Slightly damped, slightly frosted texture, it is particularly graded. The "Multiple Box" design that was opened and opened was not as addictive as it was said at the press conference. The feel of opening the lid is not good, but the feeling of closing is surprisingly comfortable.

The "charging head and data cable" inside the box are all designed in white and the parts are redesigned, which is not the same as the previous generations of products of Hammer Branch. After I got it, I immediately liked the two accessories.

The head is probably made of high-gloss plastic, but the gloss and feel in the light is better than that of a mobile phone. Especially the rounded corners of the four corners are like our mahjong "Mahjong." There is a groove at the top of the charging head to facilitate the application of force. There is a small point under the socket to facilitate the direction of the socket with the data cable.

Supports up to 12V output, purely fast charging head.

The cable of the data cable is similar to the material of the box, with a bit of damping and matte texture. The TYPE-C connector and USB connector both have a groove. Among them, the TYPE-C interface has a small circle of USB lights. "The picture was forgotten and the cell phone was sent to relatives again. To make up the picture, you may have to wait for the next M1."

I believe most of the people who came to the article came to see the stainless steel frame of the phone. I first put a wave of pictures, and then slowly talk about the appearance of the phone.

frame

The mirror stainless steel version of the hammer compared to the other M1L, except for the border, there is no other difference. The feeling of the stainless steel frame at first sight is "bright." Especially under the light, it is extraordinarily bright and it is literally "mirror surface". But then, I feel that the border doesn't feel like metal. Because the frame is too thin, there is no unique cold feeling of the metal, giving the impression more like a plastic coating. "Because I used to use the Samsung Gaisile S5 for a while, this frame gave me a very similar feeling." And, this stainless steel frame is easily contaminated with fingerprints. Just after getting started, it was already full of fingerprints.

All this really does not matter, because the border is bright enough to look good. But look at the back cover of this phone.

Rear cover

This is the response I saw on the back cover. If you say that the approximate face of Apple can still be seen, then the back of this phone is really terrible. If you say ugly, it's really not really because Gaoguang Plastics is widely used in mobile phones. But why is it so unfair on this mobile phone? I thought about this issue for a long time and I have only recently figured it out. It may be that the material of high-gloss plastic was used a few years ago, and the use of this material in 2016 will give people a feeling of backwardness, and the use of this material in the Hammer Branch does not see any progress in the process. To put it bluntly, it is to put a craft that was used by various mobile phones a few years ago into today, which naturally gives people a feeling of being left behind.

Side keys

Looking at the online reaction, the M1/M1L side button seems to have a problem with the looseness of the right side key. My station also has such a problem. Compared with the left side button, the right side button can be heard by just tapping and it feels like there is no locking.

Home button

And Apple's home button is not the same, M1/M1L button is prominent in the plane of the phone. Due to the lack of experience, there has been no online press jamming. The feel of the keys is not the same as that of Apple, but it is not good or bad. Personally, I think it is an acceptable category.

camera

The camera was raised, the protrusion was very weak, but it was still protruding. And, the camera around the edge of the metal edge cutting hand, cutting degree see iphone5, inadvertently finger across, will be cut off by the feeling of shock.

1, beautiful border

2, similar to Apple's positive face

3, there are grades, intentions made of accessories

4, a bit ugly back cover

5, Matsushita's right side button

6, cut the camera

7, a slightly raised home button

This phone was bought to support Hammer, but it was a pity that the experience after starting was not as experienced in the conference. Fortunately, the overall feeling of the phone is still possible. In particular, the post-throat camera that you do not like can be solved with a protective cover or back cover film, so these two are not considered to be a problem. However, because stainless steel M1L is too large, he is not accustomed to large-scale mobile phones, so he transferred this station to relatives. Get ready to buy another M1 for use. For M1/M1L, I still recommend some people who are not interested in the Hammer Section and the old Luo. Although this mobile phone sees a lot of compromises, it still has many bright spots. Moreover, the configuration is not bad.