Hammer crusher's six advantages

Hammer-breaker is referred to as hammer-breaking. This machine is widely used in various industries. From the perspective of a brick factory, it breaks and destroys coal gangue, shale, slag, coal cinder, limestone, and builds dross and other materials. However, the humidity of these materials is large, and it has severely affected the output of the cockroach. It is also a hidden problem that it is impossible for the normal production in the rainy days. Henan Yuhe Machinery Manufacturing Co., Ltd. introduced a new construction type hammer hammer to help you deal with this problem.

1. Two-rotor upper and lower two-stage hammer-hammer breaking machine The ring-hammer breaking machine adopts two sets of rotors in series with each other. The material is sent to the material inlet of the hammer-type breaking machine through the conveyor, and the materials are passed through the superior in the crushing and destruction chamber. The material crushed by the rotor immediately enters the hammerhead of the fast-reversing lower rotor and is crushed again. The material in the crusher destroys the cavity and rapidly collides with each other, crushes and destroys each other, constitutes the result of crushing and destroying the hammer powder, and then directly discharges directly from the discharge port. Out, constitute a material particle size of less than 3 mm. This particle can meet the needs of brick and tile manufacturers as internal combustion bricks.

Second, there is no screen bottom, high humidity materials, without intrusion The hammer stone machine has a large fracture ratio, high efficiency, strong compatibility and other characteristics, and the ring hammer fracture machine design without screen bottom, the material contains water There is no requirement on the rate, there is no problem of blocking the screen plate, and there is no problem that the material can not be discharged in real time, repeated crushing and destroying, so the efficiency of crushing and destroying is high, and there is no scene of invalid abrasion of the hammerhead.

Third, wear-resistance combination Hammer head hammer hammer hammer machine completely forged with the train wheel, then the hammer in the heat treatment process, enhance the wear resistance and toughness. More suitable for different wear resistance of hardness materials.

Fourth, the common displacement of gapping skills Hammer hammer after the hammer does not need to repair the wear, moving position can be repeatedly used, a hammer can be used top three hammer.

Fifth, the hydraulic electric starter shell with electric oil pump operation, open the ** discretionary, reversing oil valve, changed the previous hand pump no serious pull safety hazards, transport users in the application process and maintenance process more safe .

Sixth, the weight of the hammer rotor disc through heat treatment, so that the wear life of the rotor disc greatly improved, changing the previous rotor disc maintenance difficult, without the serious defects of wear.

The bearing box is made entirely of cast steel and each axis box is fixed with four screws. Change the previous generation of products due to the loose screws to form a serious safety hazard of the bearing box wear. Make the same device more scientific and more useful.